A comprehensive review of the mechanisms on fish stress affecting muscle qualities: Nutrition, physical properties, and flavor.

Fish inevitably face numerous stressors in growth, processing, and circulation. In recent years, stress-related change in fish muscle quality has gradually become a research hotspot. Thus, the understanding of the mechanism regarding the change is constantly deepening. This review introduces the physiological regulation of fish under stress, with particular attention devoted to signal transduction, gene expression, and metabolism, and changes in the physiological characteristics of muscular cells. Then, the influences of various stressors on the nutrition, physical properties, and flavor of the fish muscle are sequentially described. This review emphasizes recent advances in the mechanisms underlying changes in muscle quality, which are believed to be involved mainly in physiological regulation under stress. In addition, studies are also introduced on improving muscle quality by mitigating fish stress.

Photophysical Properties of Sinapic Acid and Ferulic Acid and Their Binding Mechanism with Caffeine.

Sinapic acid (SA) and ferulic acid (FA) are bioactive compounds used in the food, pharmaceutical, and cosmetic industries due to their antioxidant properties. In this work, we studied the photophysical properties of SA and FA in different solvents and concentrations and their interactions with caffeine (CF), using ultraviolet-visible (UV-Vis), fluorescence spectroscopy and Fourier transform infrared (FTIR) spectroscopy. The findings show that the quantum yield, fluorescence lifetime, radiative decay rates, and non-radiative decay rates of SA and FA are influenced by the concentrations and solvent polarity. The interaction between SA and FA with CF was also studied using UV-Vis and fluorescence spectroscopy. The results indicate that the CF quenched the fluorescence intensity of SA and FA by static quenching due to the formation of a non-fluorescent complex. The van't Hoff equation suggests that the van der Waals forces and hydrogen bonds force were responsible for the interaction between SA and CF, as indicated by a negative change in enthalpy ( Δ H o  < 0) and a negative change in entropy ( Δ S o  < 0). On the other hand, the interaction between FA and CF was primarily controlled by electrostatic force, as indicated by a negative change in enthalpy ( Δ H o < 0) and a positive change in entropy ( Δ S o > 0). The negative change in Gibbs free energy ( Δ G o ) indicates that both compounds underwent a spontaneous binding process.

Distinctive physical properties of DNA shared by RNA polymerase II gene promoters and 5'-flanking regions of tRNA genes.

Numerous noncoding (nc)RNAs have been identified. Similar to the transcription of protein-coding (mRNA) genes, long noncoding (lnc)RNA genes and most of micro (mi)RNA genes are transcribed by RNA polymerase II (Pol II). In the transcription of mRNA genes, core promoters play an indispensable role; they support the assembly of the preinitiation complex (PIC). However, the structural and/or physical properties of the core promoters of lncRNA and miRNA genes remain largely unexplored, in contrast with those of mRNA genes. Using the core promoters of human genes, we analyzed the repertoire and population ratios of residing core promoter elements (CPEs) and calculated the following five DNA physical properties (DPPs): duplex DNA free energy, base stacking energy, protein-induced deformability, rigidity and stabilizing energy of Z-DNA. Here, we show that their CPE and DPP profiles are similar to those of mRNA gene promoters. Importantly, the core promoters of these three classes of genes have two highly distinctive sites in their DPP profiles around the TSS and position -27. Similar characteristics in DPPs are also found in the 5'-flanking regions of tRNA genes, indicating their common essential roles in transcription initiation over the kingdom of RNA polymerases.

[Molding law of traditional Chinese medicine gel plaster based on physicochemical properties of raw materials and intermediates].

This paper aims to study the correlation between the physicochemical properties of raw materials and intermediates and the molding quality and law of traditional Chinese medicine(TCM) gel plaster by using TCM slices and powder as raw materials. 48 TCM compounds are selected as model prescriptions to prepare gel plasters. The rotational rheometer is used to determine the rheological parameters of the plaster, including storage modulus(G'), loss modulus(G″), yield stress(τ), and creep compliance [J(t)]. The molding quality of the prepared TCM gel plaster is evaluated by subjective and objective measures. Clustering and principal component analysis are conducted to evaluate the physical properties of the plaster. By measuring the rheological properties of the plaster, the molding quality of the TCM gel plaster can be predicted, with an accuracy of 83.72% after seven days of modeling and 88.37% after 30 days of modeling. When the parameters such as G' and G″ of the plaster are large, and the [J(t)] is small, the molding quality of the plaster is better. When the plaster coating point is no less than 3, it is difficult to be coated. In addition, when the proportion of metal ions in the prescription is higher, the 30-day forming quality of the plaster is mainly affected, and the viscosity of the plaster is poor. If the prescription contains many acidic chemical components, the 7-day forming quality of the plaster is mainly affected, with many residuals. The results suggest that the rheological properties of the plaster can be used to predict the molding quality of TCM slice and powder gel plaster. It can provide a reference for the development of TCM gel plaster prescriptions.

Effect of super absorbent hydrogel on hydro-physical properties of soil under deficit irrigation.

Due to water scarcity challenges, efficient management of irrigation water is becoming crucial. Water use efficiency (WUE) involves increasing crop productivity without increasing water consumption. This study was carried out to study the effect of hydrogel, deficit irrigation and soil type on WUE, soil hydro-physical properties and lettuce productivity. For this purpose, four irrigation treatments (100%, 85%, 70% and 60% of full irrigation requirements), four hydrogel concentrations (0, 0.1, 0.2 and 0.3% w/w) and three soil textural classes (clay, loamy sand, and sandy-clay soil) were conducted in pot experiment at open field during two consecutive seasons. The results revealed that crop growth parameters and soil hydro-physical properties were significantly affected by hydrogel application rates. Hydrogel addition significantly enhanced head fresh and dry weights, chlorophyll content, number of leaves and WUE. Application of hydrogel at 0.3% and 85% of irrigation requirements achieved the highest WUE without significant yield reductions. Changes in the studied hydro-physical properties of soil were more dependent on soil texture and hydrogel application rate than on the amount of irrigation water. The significant decrease in soil saturated hydraulic conductivity and bulk density confirms that super absorbent hydrogels could be recommended to improve soil water retention and enhance water use efficiency under deficit irrigation conditions.

Flexible Denture: A Literature Review.

Careful consideration of material properties used to construct denture base material in removable partial dentures (RPDs) is required for a successful outcome. Because of nylon's flexible nature, nylon denture bases are a widely used alternative material to polymethyl methacrylate (PMMA) in RPDs. Flexible dentures help with retention by creating a seal around the denture's border. In this study, we review current evidence on flexible dentures and provide an overview of their uses, advantages, and disadvantages. We conducted electronic research of English-language articles written between 2018 and 2023 that addressed the different physical and mechanical properties of flexible dentures. Flexible dentures' water sorption did not exceed ISO standards. Other physical properties we investigated, such as color stability and polymerization shrinkage, were lower in flexible dentures than in PMMA. Mechanical properties showed a lower value compared to PMMA, such as surface roughness and hardness, and impact strength. However, flexural strength was controversial. Retention was better in PMMA compared to flexible dentures. Finally, the retention of acrylic teeth compared to flexible dentures was better with the provision of extra mechanical retention means. Therefore, it is important to examine flexible dentures' properties, indications, advantages, and disadvantages when offering patients this solution.

Exploring the influence of pressure-induced semiconductor-to-metal transition on the physical properties of cubic perovskites FrXCl3 (X = Ge and Sn).

Even though lead halide perovskites have outstanding physiochemical properties and improved power conversion efficiency, most of these compounds threaten their future commercialization because of their instability and highly toxic nature. Thus, it is preferable to use stable alternative elements rather than lead to make environmentally friendly perovskite material that will have comparable optical and electronic properties to those constructed from Pb-based perovskites. However, devices constructed from lead-free perovskites typically display a lower power conversion efficiency. Applying hydrostatic pressure could be deemed an effective method to alter the physical properties of these compounds. This not only improves their performance in application but also reveals significant correlations between structure and properties. This work uses DFT to investigate the structural, electronic, optical, and elastic properties of non-toxic, francium-based halide perovskites FrXCl3 (X = Ge, Sn) at different levels of hydrostatic pressures that vary from 0 to 10 GPa. The estimated structural parameter's strong correlation with the data from earlier studies ensures the accuracy of the current findings. Pressure causes the Fr-Cl and Ge (Sn)-Cl bonds to shorten and become stronger. The electronic property calculations demonstrated that both compounds are direct band-gap semiconductors. The application of pressure leads to a linear reduction in the band gap (semiconducting to metallic state) and raises the electronic density of states around the Fermi level by forcing the valence band electrons upward, indicating that the optoelectronic device's performance can be tuned and improved. The values of the dielectric constant, absorptivity and reflectivity showed an increasing tendency with pressure. As the pressure applied to the compounds increases, the absorption spectra show a redshift. These findings suggested that the FrXCl3 (X = Ge and Sn) compound becomes more appropriate for usage in optoelectronic applications under pressure. Furthermore, our examination of the mechanical properties indicates that both FrGeCl3 and FrSnCl3 exhibit mechanically stability, and ductility. Interestingly, we observe an increase in ductility as pressure levels rise.

Physical properties and mass models of Deglet Noor and Arichti semi-dry Algerian date fruits: A comparative study.

For thousands of years, date fruit (Phoenix dactylifera L.) has been a popular diet in arid and semi-arid locations. It has religious importance for Muslims and is especially important during the holy month of Ramadan. The global output of date fruits has been continuously expanding, with Arab nations accounting for a sizable portion. The emphasis of this research is on two popular semi-dry Algerian date fruit types, Deglet Noor and Arechti, which are grown in the Ziban region. These fruits' physical parameters, such as size, sphericity, surface area, volumes, and density, were determined. The goal of this study was to create a mass model based on these physical attributes to help in the grading and sorting of date fruits. Fruit mass was shown to be closely connected to linear dimensions, arithmetic and geometric mean diameters, surface area, and volumes. Correlations between mass and physical attributes were established using a variety of mathematical models, including linear, quadratic, S-curve, and power models. The results demonstrated the applicability of specific factors for mass modeling, offering useful insights for the development of system sizing and conservation. With good correlation, multivariate data analysis was employed to correctly estimate the mass of both kinds. This research advances our understanding of the physical features of Algerian date fruits and their connection to mass, allowing for better handling, sorting, and packing processes in the worldwide date market.

[Effect of printing orientation on physical and mechanical properties of 3D printing prosthodontic base resin materials].

OBJECTIVE: To analyze the influence of forming direction on the surface characteristics, elastic modulus, bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction, and to provide scientific basis and guidance for the clinical application of oral denture base resin materials. METHODS: The 3D printing technology was used to print denture base resin samples. The shape and size of the samples referred to the current standard for testing conventional denture base materials. The samples used for physical performance testing were cylindrical (with a diameter of 15 mm and a thickness of 1 mm) and printed at different angles along the Z axis (0°, 45°, 90°). Scanning electron microscope was used to observe the microscopic topography of the different samples. The color stability of different samples was observed by color stabilizer. The surface roughness of the samples was analyzed by using surface roughness tester. The Vickers hardness was measured to analyze the hardness of the samples. The samples used for mechanical performance testing were rectangular (elastic modulus and bending strength: A length of 64 mm, a width of 10 mm, and a height of 3.3 mm; fracture toughness: A length of 39 mm, a width of 8 mm, and a height of 4 mm), divided into two groups: W group and H group. The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X, Y axis plane, while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X, Y axis plane. The forming angles of both groups were equally divided into 0°, 45°, and 90°. The elastic modulus, bending strength and fracture toughness of different samples were studied through universal mechanical testing machine. SPSS 22.0 software was used for statistical analysis. RESULTS: The microscopic topography and roughness of different samples were closely related to the printing direction, with significant differences between the 0°, 45°, and 90° specimens. The 0° specimens had the smoothest surface (roughness < 1 µm). The surface of the 45° specimen was the roughest (roughness>3 µm). The microhardness of the 0° sample was the best [(196.13±0.20) MPa], with a significant difference compared with the 90° sample [(186.62±4.81) MPa, P < 0.05]. The mechanical properties of different samples were also closely related to the printing direction. The elastic modulus, bending strength, and fracture toughness of the 45° samples in the W group were the highest compared with the other groups. The results of elastic modulus showed that in the H group, the 45° specimens had the highest elastic mo-dulus, which was significantly different from the 0° and 90° specimens (P < 0.05). The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens (P < 0.05). The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group. The bending strength of the 90° specimens in the W group was the smallest, and there was a significant difference between 90° and the 0° and 45° specimens (P < 0.05); And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group (P < 0.05). The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2, which was specified in the denture base standard. The 45° samples in the W group were the highest, with significant differences compared with the 0° and 90° samples (P < 0.05). And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2. And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group (P < 0.05). CONCLUSION: The 0° samples had relatively better physical properties. The 45° samples had the best mechanical properties. But the fracture toughness of specimens (H group and 90° samples of W group) did not yet meet clinical requirements. That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction. Only when the performance of the printed samples in all directions met the minimum requirements of the standard, they could be used in clinical practice.

Sustainable high-strength and dimensionally stable composites through in situ regulation and reconstitution of bamboo-derived lignin and hemicellulose contents.

The development of modern construction and transportation industries demands increasingly high requirements for thin, lightweight, high-strength, and highly tough composite materials, such as metal carbides and concrete. Bamboo is a green, low-carbon, fast-growing, renewable, and biodegradable material with high strength and toughness. However, the density of its inner layer is low due to the functional gradient (the volume fraction of vascular bundles decreases from the outer layer to the inner layer), resulting in low performance, high compressibility, and significant amounts of bamboo waste. We utilized chemical and mechanical treatments of bamboo's low-density, low-strength inner layers to create lightweight, ultra-thin, high-strength, and high-toughness composites. The treatment included the partial removal of lignin and hemicellulose to alter the chemical components, followed by mechanical drying and hot pressing. The treated bamboo had 100.8 % higher tensile strength (150.35 MPa), 47.7 % higher flexural strength (97.67 MPa), and 132.0 % higher water resistance and was approximately 68.9 % thinner than the natural bamboo. The excellent physical and mechanical properties of the treated bamboo are attributed to the contraction of parenchyma cells during delignification, the interlocking due to the collapse of parenchyma cells during mechanical drying, and an increase in the density of hydrogen bonds between cellulose molecular chains during hot pressing. Our research provides a new strategy for obtaining sustainable, ultra-thin, lightweight, high-strength, and high-toughness composite materials from bamboo for construction and transportation applications.

Effects of cooking methods on the physical properties and in vitro digestibility of starch isolated from Chinese yam.

The objective of this study was to compare the structural and functional attributes of Chinese yam starches obtained via different domestic cooking methods. Cooking changed the crystalline type from the C type to the CB type, and disrupted the short- and long-range molecular order of Chinese yam starch. The average chain length of amylopectin in BOS (boiling starch) was the smallest at 22.78, while RWS had the longest average chain length, reaching 24.24. These alterations in molecular structure resulted in variations in functional properties such as solubility, swelling power (SP), pasting characteristics, and rheological properties. Among these alterations, boiling was the most effective method for increasing the water-binding capacity and SP of starch. Specifically, its water holding capacity was 2.12 times that of RWS. In vitro digestion experiments indicated that BOS has a higher digestion rate (k = 0.0272 min-1) and lower RDS (rapidly digestible starch), which may be related to its amylopectin chain length distribution. This study can guide us to utilize yam starch through suitable cooking methods, which is relevant for the processing and application of Chinese yam starch.

Quality Characteristics and Storage Stability of Frying Steak Utilizing Wax-Based Korean Pine Seed Oil.

To investigate the disparities in product quality and storage stability between wax-based Korean pine seed oil gel and butter when used for frying steak, a comparative analysis was conducted on cooking loss, color, texture characteristics, sensory evaluation, and volatile flavor substances using headspace solid phase microextraction combined with GM-MS. Furthermore, the storage stability was assessed. The findings revealed that the cooking loss rate of steaks significantly increased with doneness, with butter steak exhibiting a significantly higher loss rate compared to the three oil gel steaks. Hardness, chewiness, and adhesiveness greatly increased as doneness progressed; however, cohesiveness, elasticity, and resilience showed minimal variation. The L* value and b* value of steaks initially increased before stabilizing with increasing doneness levels while the a* value first rose before gradually declining. Medium rare steak received the highest sensory score among all categories tested and 69 volatile flavor compounds were detected. Multivariate data analysis indicated similarities in volatile compounds between butter steak and BW (wax-based Korean pine seed oil gel) steak groups. Additionally, during storage at 4 °C temperature conditions pH level retention water content TVB-N (total volatile basic nitrogen), TBARS (thiobarbituric acid reactive substances) were evaluated to determine advantages or disadvantages within each group: Beeswax (BW) > Carnauba wax (CW) > Rice bran wax (RBW) > butter based on these parameters' values. It can be concluded that utilizing wax-based Korean pine seed oil gel for frying steaks not only effectively retains significant amounts of unsaturated fatty acids but also preserves steak quality while extending shelf life-a healthier cooking method resulting in reduced oil absorption.

Long-term storage under pressure in deep sea improved the microbiological safety and physical properties of whale meat.

This study aimed to clarify the effects of deep-sea pressure storage on the quality of whale meat, especially microbiological safety and physical properties, to examine the effectiveness of deep-sea storage for long-term aging of whale meat. Microbiological safety, physical properties, color and appearance, water content, water activity, and pH of whale meat were examined after storage in the deep sea at depths of 2200-6000 m (22-60 MPa) for 4 months. During storage under high pressure at a depth of >4000 m (40 MPa), the growth of aerobic bacteria was inhibited in whale meat. The toughness of whale meat stored in deep sea at a depth of >4000 m became significantly tender than that before deep-sea storage. Long-term storage of whale meat under high pressure and low-temperature conditions in the deep sea at a depth of >4000 m was clarified to improve the microbiological safety and tenderness of whale meat.

Physicochemical and antioxidant properties of pectin from Actinidia arguta Sieb.et Zucc (A. arguta) extracted by ultrasonic.

Pectin was extracted from Actinidia arguta Sieb. et Zucc (A.arguta) using the ultrasound-assisted acid method and the single acid method. The physicochemical properties, structure, and antioxidant properties of two different pectins were investigated. The results showed that the extraction yield of the ultrasound-assisted acid method is higher than that of the single acid method. The molecular structure of A. arguta pectin extracted by the ultrasound-assisted acid method belongs to a mixed structure of RG-I and HG-type domains. Through structural feature analysis, the ultrasound-assisted extraction pectin (UAP) has a more branched structure than the single acid-extracted pectin (SAP). The SAP has a higher degree of esterification than the UAP. The physical property results show that the viscosity, solubility, and water-holding capacity of the UAP are better than those of the SAP. The antioxidant test results show that the hydroxyl radical scavenging and reducing powers of the UAP are superior to those of the SAP. This study shows the composition, physicochemical properties, and antioxidant activity of A. arguta pectin extracted by the ultrasonic-assisted extraction method to provide a theoretical basis for its application as an antioxidant and other food additives in the food industry.

Influence of waste polyethylene/WCO composite on physical and chemical properties of asphalt.

The use of waste polyethylene (WPE) in modified asphalt is frequently employed to reduce environmental pollution and improve asphalt properties. However, research has shown that using WPE alone as a modifier does not effectively enhance the low-temperature flexibility of asphalt. This study aims to investigate the potential of utilizing WPE and waste cooking oil (WCO) as composite modifiers to enhance the properties of virgin asphalt under both high and low-temperature conditions. The contents of WPE and WCO were used, and the preparation process for the modified asphalt was optimized through an orthogonal experiment. The experimental results indicate that the optimal formulation for the WPE/WCO composite modified asphalt (WPE/WCO-A) is obtained with an additive dosage of 8% and 1% by mass of virgin asphalt for WPE and WCO, respectively, as well as the maintenance process at a temperature of 140 °C and a duration of 2 h. Dynamic shear rheometer (DSR) results reveal that WPE/WCO composite modifier can greatly improve the high-temperature deformation resistance of asphalt. Bending beam rheometer (BBR) tests confirm that WPE adversely affects the low-temperature flexibility of asphalt, while the addition of WCO can improve it. WPE/WCO-A has even better low-temperature properties than virgin asphalt (VA). The Fourier transform infrared spectroscopy (FT-IR) results suggest that the composite modification of asphalt by WPE/WCO modifiers is dominated by physical action. Furthermore, the fluorescence microscopy test results demonstrate that WCO can promote WPE swelling in asphalt. This study offers a novel approach to improve the comprehensive properties of asphalt through composite modification using WPE and WCO.

Advancing material property prediction: using physics-informed machine learning models for viscosity.

In materials science, accurately computing properties like viscosity, melting point, and glass transition temperatures solely through physics-based models is challenging. Data-driven machine learning (ML) also poses challenges in constructing ML models, especially in the material science domain where data is limited. To address this, we integrate physics-informed descriptors from molecular dynamics (MD) simulations to enhance the accuracy and interpretability of ML models. Our current study focuses on accurately predicting viscosity in liquid systems using MD descriptors. In this work, we curated a comprehensive dataset of over 4000 small organic molecules' viscosities from scientific literature, publications, and online databases. This dataset enabled us to develop quantitative structure-property relationships (QSPR) consisting of descriptor-based and graph neural network models to predict temperature-dependent viscosities for a wide range of viscosities. The QSPR models reveal that including MD descriptors improves the prediction of experimental viscosities, particularly at the small data set scale of fewer than a thousand data points. Furthermore, feature importance tools reveal that intermolecular interactions captured by MD descriptors are most important for viscosity predictions. Finally, the QSPR models can accurately capture the inverse relationship between viscosity and temperature for six battery-relevant solvents, some of which were not included in the original data set. Our research highlights the effectiveness of incorporating MD descriptors into QSPR models, which leads to improved accuracy for properties that are difficult to predict when using physics-based models alone or when limited data is available.

Precision Engineering of Chondrocyte Microenvironments: Investigating the Optimal Reaction Conditions for Type B Gelatin Methacrylate Hydrogel Matrix for TC28a2 Cells.

Gelatin methacrylate (GelMA) is a photocrosslinkable biomaterial that has gained widespread use in tissue engineering due to its favorable biological attributes and customizable physical and mechanical traits. While GelMA is compatible with various cell types, distinct cellular responses are observed within GelMA hydrogels. As such, tailoring hydrogels for specific applications has become imperative. Thus, our objective was to develop GelMA hydrogels tailored to enhance cell viability specifically for TC28a2 chondrocytes in a three-dimensional (3D) cell culture setting. We investigated GelMA synthesis using PBS and 0.25M CB buffer, analyzed the mechanical and physical traits of GelMA hydrogels, and evaluated how varying GelMA crosslinking conditions (GelMA concentration, photoinitiator concentration, and UV exposure time) affected the viability of TC28a2 chondrocytes. The results revealed that GelMA synthesis using 0.25M CB buffer led to a greater degree of methacrylation compared to PBS buffer, and the LAP photoinitiator demonstrated superior efficacy for GelMA gelation compared to Irgacure 2959. Additionally, the stiffness, porosity, and swelling degree of GelMA hydrogels were predominantly affected by GelMA concentration, while cell viability was impacted by all crosslinking conditions, decreasing notably with increasing GelMA concentration, photoinitiator concentration, and UV exposure time. This study facilitated the optimization of crosslinking conditions to enhance cell viability within GelMA hydrogels, a critical aspect for diverse biomedical applications.

Effect of Deposition Working Power on Physical Properties of RF-Sputtered CdTe Thin Films for Photovoltaic Applications.

The main objective of this study was to determine the variation in the properties of cadmium telluride (CdTe) thin films deposited on a p-type Si substrate by the radio frequency magnetron sputtering technique at four different working powers (70 W, 80 W, 90 W, and 100 W). The substrate temperature, working pressure, and deposition time during the deposition process were kept constant at 220 °C, 0.46 Pa, and 30 min, respectively. To study the structural, morphological, and optical properties of the CdTe films grown under the mentioned experimental conditions, X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and optical spectroscopy were used. For a better analysis of the films' structural and optical properties, a group of films were deposited onto optical glass substrates under similar deposition conditions. The electrical characterisation of Ag/CdTe/Al "sandwich" structures was also performed using current-voltage characteristics in the dark at different temperatures. The electrical measurements allowed the identification of charge transport mechanisms through the structure. New relevant information released by the present study points towards 90 W RF power as the optimum for obtaining a high crystallinity of ~1 µm nanostructured thin films deposited onto p-Si and optical glass substrates with optical and electrical properties that are suitable for use as absorber layers. The obtained high-quality CdTe nanostructured thin films are perfectly suitable for use as absorbers in CdTe thin-film photovoltaic cells.

Effects of vehicles on the physical properties and biocompatibility of premixed calcium silicate cements.

Premixed calcium silicate cements (pCSCs) contain vehicles which endow fluidity and viscosity to CSCs. This study aimed to investigate the effects of three vehicles, namely, polyethylene glycol (PEG), propylene glycol (PG), and dimethyl sulfoxide (DMSO), on the physicochemical properties and biocompatibility of pCSCs. The setting time, solubility, expansion rate, and mechanical strength of the pCSCs were evaluated, and the formation of calcium phosphate precipitates was assessed in phosphate-buffered saline (PBS). The effects of pCSC extracts on the osteogenic differentiation of mesenchymal stem cells (MSCs) were investigated. Finally, the tissue compatibility of pCSCs in rat femurs was observed. CSC containing PEG (CSC-PEG) exhibited higher solubility and setting time, and CSC-DMSO showed the highest expansion rate and mechanical strength. All pCSCs generated calcium phosphate precipitates. The extract of CSC-PG induced the highest expressions of osteogenic markers along with the greatest calcium deposites. When implanted in rat femurs, CSC-PEG was absorbed considerably, whereas CSC-PG remained relatively unaltered inside the femur.

Physical and mechanical properties of ocular thin films: a systematic review and meta-analysis.

The ocular thin film presents a potential solution for addressing challenges to ocular drug delivery. In this review, we summarise the findings of a comprehensive review analysing 336 formulations from 68 studies. We investigated the physical and mechanical properties of ocular thin films, categorised into natural polymer-based, synthetic polymer-based, and combined polymer films. The results showed that the type of polymers used impacted mucoadhesion force, moisture absorption:moisture loss ratio, pH, swelling index, and elongation percentage. Significant relationships were found between these properties within each subgroup. The results also highlighted the influence of plasticisers on elongation percentage, mucoadhesion force, swelling index, and moisture absorption:moisture loss ratio. These findings have implications for designing and optimising ocular drug formulations and selecting appropriate plasticisers to achieve formulations with the desired properties.